EIC Accelerator Newcomer aevoloop and Recyclable Polyolefins

16 November 20261,943 words10 min

Polyethylene and polypropylene are made to resist almost everything, including the chemistry that would turn them back into new plastic. Breaking polyethylene down chemically takes temperatures above 600 °C and returns less than 10 per cent of the material as ethylene, the University of Konstanz wrote in February 2021, when one of its chemists, Manuel Häußler, published a way around the problem in Nature. Three years later he co-founded aevoloop to commercialise it.

On 16 November 2026 the European Innovation Council named aevoloop GmbH among 35 companies selected for its Accelerator. The published list for the May and July 2026 cut-offs gives the project as PLASTICS 2.0, "A Molecular Restart", recommended for blended finance. The list states that selection "does not constitute a formal commitment for funding", and the EIC expects the grant agreements to be finalised within three months. This article sets out what the company promises and what can already be checked.

35 of 453Companies selected from full applications in the round
€8.25MSeed and grant money announced by aevoloop in October 2025
96%Material recovered in the 2021 Nature study, per the University of Konstanz

Company file

Legal entity
aevoloop GmbH, Amtsgericht Leipzig HRB 43075, Markt 9, 04109 Leipzig
Founded
18 February 2024 per its register profile, with €37,008 of share capital
Managing directors
Manuel Häußler and Philipp Keßler (CEO)
Headquarters
Leipzig since spring 2025, moved from Konstanz
Investors
Circulate Capital (lead), Positron Ventures, bmp Ventures via the IBG Innovationsfonds
Public funding
SPRIND start-up funding; Saxy Plastics grant from the EU and Saxony
EIC project
PLASTICS 2.0, May-July 2026 cut-offs, blended finance, selected 16 November 2026
Staff
14 in May 2025, per Invest Region Leipzig

A breaking point built into the chain

The science is on the record. The Nature paper "Closed-loop recycling of polyethylene-like materials", by Häußler, Marcel Eck, Dario Rothauer and Stefan Mecking, appeared on 17 February 2021. According to the university's release, the polymers carry a low density of predetermined breaking points along an otherwise polyethylene-like chain, so the crystalline structure and properties are kept, and recycling recovers about 96 per cent of the starting material at about 120 °C. The release adds that the method also worked on mixtures with other plastics found in waste streams.

aevoloop describes its version in commercial terms. Its website speaks of polymers with "heteroatom-based predetermined breaking points" that allow low-energy recycling, and says the materials match or exceed polyolefin performance "without a green price premium". The company's funding release says it replaces individual links in polyethylene or polypropylene chains with bonds that can be opened selectively, that the plastics run on existing extruders and injection-moulding machines, and that they are biodegradable, which it says could eventually address microplastics. These are the company's claims; no independent test of the commercial materials could be found in sources reviewed on 16 November 2026.

One material, several descriptions

The sources describe the feedstock differently. The 2021 paper's release speaks of polyethylene-like materials from renewable sources. The company website says its plastics are made from end-of-life plastic waste that would otherwise be incinerated. SPRIND describes an oxidation reaction that breaks old plastic into molecular fragments, which are chained back into new polymers or sold as a white powder for cleaning agents, coatings and additives. The Saxy Plastics announcement calls the target materials bio-based, recyclable and biodegradable. Which route PLASTICS 2.0 scales is not stated in any public source.

Every funding release calls the technology "patented". None names a patent number, and a web search for patent publications under the company's name on 16 November 2026 returned none. Google Patents does list a University of Konstanz application from May 2020 naming Häußler among the inventors (EP3907250A1, with the international filing WO2021224303A2), with the European application shown as withdrawn; no source reviewed says whether aevoloop holds or licenses this family.

From Konstanz to the chemical triangle

According to SPRIND, the Federal Agency for Disruptive Innovation, the work began with a SPRIND validation task in 2023, completed in late 2023, followed by start-up funding of just under €1 million, one of the first of its kind from the agency. The company was founded in 2024 by Häußler, a chemist, and Philipp Keßler, a business economist and experienced founder, with Timo Witt as CTO and Carl Warkentin completing the management team, SPRIND says. The register profile on Implisense gives 18 February 2024 as the founding date, and the company's imprint names Häußler and Keßler as managing directors.

In spring 2025 the company moved its headquarters from Konstanz to Leipzig, partly to be near the Center for the Transformation of Chemistry (CTC), where Häußler also leads a research group, CleanThinking reported. Invest Region Leipzig put the team at 14 in May 2025 and the site at the German Biomass Research Centre (DBFZ); its success story dated May 2026 places research and initial pilot production at the Helmholtz Centre for Environmental Research (UFZ) instead. The two pages do not explain the difference. The company's news page lists a Handelsblatt Chemie 2025 start-up award in May 2025, and the May 2026 page says Häußler presented the company at the 100th ZEIT Forum Wissenschaft in Berlin in March 2026.

The record

From a 2021 Nature paper to an EIC selection in five years

The chemistry behind aevoloop was published from the University of Konstanz in February 2021; the company was registered in 2024, moved to Leipzig in 2025 and was selected for the EIC Accelerator in November 2026.

  1. Feb 2021Nature paperHäußler, Eck, Rothauer and Mecking publish closed-loop recycling of polyethylene-like materials, with about 96% recoveryUniversity of Konstanz
  2. 2023SPRIND validationThe federal agency for disruptive innovation runs a validation task on the technology, completed in late 2023
  3. Feb 2024Company foundedaevoloop GmbH, with a founding date of 18 February 2024 in its register profile€37,008 capital
  4. Spring 2025Move to LeipzigHeadquarters move from Konstanz to Leipzig with a team of 14
  5. Oct 2025Seed and grantsSeed round led by Circulate Capital plus the Saxy Plastics grant from the EU and Saxony€8.25M announced
  6. Jul 2026EIC cut-offsPLASTICS 2.0 appears on the list for the May and July 2026 cut-offs, a round that drew 453 full applications
  7. Nov 2026SelectedOne of 35 companies on the EIC list, recommended for blended finance; grant preparation still to be finalisedSelected

University of Konstanz via EurekAlert, 17 February 2021; SPRIND; Implisense register profile; Invest Region Leipzig, 13 May 2025 and May 2026; bmp Ventures, 28 October 2025; EIC, 16 November 2026.

Seed money and a regional grant

On 28 October 2025 aevoloop announced €8.25 million. The figure combines two different kinds of money, per the release published by bmp Ventures: a seed round of about €3.25 million led by Circulate Capital with Positron Ventures and bmp Ventures through the IBG Innovationsfonds, and just under €5 million of grants from the EU and the Free State of Saxony. Circulate Capital lists aevoloop in its portfolio and dates its investment to November 2025.

The grant is aevoloop's share of Saxy Plastics, a research consortium funded through the Sächsische Aufbaubank with money from the European Regional Development Fund. plasticker reported a total project volume of about €8.4 million, with €6.4 million of public funding, almost €5 million of it for aevoloop as lead partner. The partners are the Leibniz Institute of Polymer Research Dresden, which develops compounds for packaging and technical parts, Leipzig University, which works on enzymes that break the polymers down under mild conditions, and the CTC, which works on transfer to large-scale processes.

The money

Grant money outweighs private capital in aevoloop's announced funding

The €8.25M total is the company's own sum of a seed round and its share of the Saxy Plastics grant. SPRIND's start-up funding is reported separately. No amount for the EIC award is published.

bmp Ventures and renewable-carbon.eu, 28 October 2025; plasticker, 28 October 2025; SPRIND project page. Values in € millions.

None of this is EIC money. The EIC announcement gives €84 million in proposed grants for all 35 selected companies and says 32 of them will be assessed for EIC Fund equity of up to €10 million each; it publishes no per-company amount. The EIC Fund portfolio did not list aevoloop on 16 November 2026, and a CORDIS search for the company name on the same date returned no project, as expected for a selection whose grant agreement is not yet signed.

What the EIC selected

The round was competitive. Of 453 proposals that reached the full application stage, 88 were interviewed and 35 selected, according to the EIC, which says the companies come from 17 countries, most of them from France, Switzerland and Germany. aevoloop is one of 32 companies on the list recommended for blended finance, the combination of a grant and EIC Fund equity. The list gives www.consumers-protection.org as the website for aevoloop and four other selected companies, an entry that does not match the company's own domain.

The competition

One of 35 companies picked from 453 full applications

The evaluation round announced on 16 November 2026 narrowed 453 full applications to 88 interviews and 35 selected companies; 32 of the 35, aevoloop among them, are recommended for blended finance.

EIC, 16 November 2026; EIC list of selected companies, EIC Accelerator 2026, 3rd and 4th batch.

The policy fit is direct. The EU's packaging regulation, Regulation (EU) 2025/40, entered into force on 11 February 2025 and applies from 12 August 2026; the Commission says it aims to "make all packaging on the EU market recyclable in an economically viable way by 2030" and to increase the use of recycled plastics in packaging. aevoloop's pitch is that a polyolefin designed to come apart turns that obligation into a product feature. Whether its materials meet the regulation's recyclability criteria is not assessed in any public document reviewed.

What can be checked today

The project title and short description are all the EIC has published about PLASTICS 2.0. The company's own plans give the yardsticks: its website announces a second location in the chemical triangle of Saxony-Anhalt to host a pilot plant, funded through the IBG Innovationsfonds with ERDF money, and the October 2025 release names pilot projects with industrial partners for films, injection-moulded parts and fibres. Startup Mitteldeutschland reported in June 2025 that the company aims for a European production and licensing structure.

  1. Peer-reviewed chemistryPublishedNature, 17 February 2021, per the University of Konstanz.
  2. Private and public fundingAnnouncedSeed round and Saxy Plastics grant announced on 28 October 2025; lead investor confirms on its portfolio page.
  3. Signed EIC grantToo earlySelection announced 16 November 2026; agreements expected within three months; no CORDIS record yet.
  4. Pilot plant in Saxony-AnhaltAnnouncedPlanned on the company website; no site, capacity or start date published in sources reviewed on 16 November 2026.
  5. Industrial customersUnnamedSPRIND and the company speak of first customers and running pilot projects; none is named.
  6. Patent protectionNot identifiedDescribed as patented; no patent number named. A related University of Konstanz application lists Häußler as inventor; any licence is not public.

What the company says

Plastics that perform like polyethylene and polypropylene, run on existing machines, can be recycled again and again without loss of quality, biodegrade if they escape, and cost no more than the materials they replace.

What the record shows

A 2021 Nature paper by its co-founder, a Leipzig GmbH registered in 2024, a seed round and a regional grant announced in October 2025, and an EIC selection in November 2026; no named customer, patent number, pilot plant site or independent test of the commercial materials; the company says first pilot lines have started.

Verdict

aevoloop comes to the EIC with its core idea already through peer review: the chemistry appeared in Nature five years before the selection. The company has turned that into money, with a lead investor, a federal agency and a regional consortium behind it. What a plastics buyer would check next, from the price per tonne to who is moulding the material today, is not public, and the Saxony-Anhalt pilot plant is still a plan.

The reporting is based on publicly available sources, listed below.

Industry

Climate and environmentRecycling

AlsoMaterials and chemicalsBio-based materials

Focus
  • Plastic recycling
  • Bio-based polymers
Technologies
  • Polymer chemistry
  • Chemical recycling
  • Injection moulding
Keywords
  • Polyolefins
  • Biodegradable plastics
  • Microplastics
  • Circular economy
  • Packaging regulation