AlixLabs Puts EIC Accelerator Backing on Atomic-Scale Chip Etching

17 November 20261,995 words10 min

Every new generation of chips packs its lines closer together, and for the finest layers chipmakers either buy extreme ultraviolet (EUV) lithography machines or repeat a chain of deposition and etching steps several times to double the line count. AlixLabs, a company in Lund, Sweden, says one step of atomic layer etching can split each printed line in two instead. It calls the method Atomic Pitch Splitting, or APS, and has spent seven years trying to get it from a university cleanroom onto a fab floor.

The European Innovation Council selected the company's project, APS ("Atomic Pitch Splitting for Advanced Node Manufacturing"), in the batch covering the May and July 2026 cut-offs, and recommended it for blended finance, according to the EIC announcement of 16 November 2026 and its list of selected companies. The list states that selection "does not constitute a formal commitment for funding", and the EIC expects grant agreements to be finalised within three months. No APS project appears in CORDIS yet.

€2.5MGrant the company says it was selected for; up to €10M EIC Fund equity possible
€15MSeries A closed in Q1 2026, per the company
SEK 18.5MTurnover in 2025, up from SEK 3.9M in 2024, per filed accounts

Company file

Legal entity
AlixLabs AB, a Swedish limited company, org. no. 559212-9695
Registered
22 July 2019, with SEK 175,000 of share capital listed today
Headquarters
Ole Römers Väg 1, Lund, at the RISE ProNano facility
Origin
Spin-off from Lund University's NanoLund and Lund Nano Lab
CEO
Jonas Sundqvist, co-founder
Known investors
Navigare Ventures, Industrifonden, FORWARD.one, STOAF, Global Brain, Stephen Industries, Almi Invest
Product
Sax Forma, a 300 mm APS etch tool in beta
EIC project
APS, May/July 2026 cut-off batch, blended finance; no grant agreement public yet
Staff
11 employees, per Allabolag

Splitting a line instead of printing two

The established way to go below what one lithography exposure can print is self-aligned multiple patterning: a film is deposited along the sides of each printed line, the line is removed, and the remaining side walls become two lines where there was one. Each round adds deposition, etching and cleaning steps. AlixLabs says APS replaces that loop. On its Sax Forma launch page of 23 June 2026 it describes APS as a complementary step inserted after a pattern is defined by DUV, EUV or nanoimprint lithography, which divides the nanostructures by atomic layer etching, a cyclic plasma-based dry etch that removes material a few atoms at a time.

A 2023 report by Techarenan explains the mechanism the company described then: inclined surfaces, made by dry etching or epitaxial growth, act as the mask for the atomic layer etch, so a structure can be split in half "with a single atomic-level etching step". The company's own website claims the method cuts patterning costs "by up to 50%" and lowers chamber, energy and cleanroom demands. Those are the company's figures; no independent cost comparison could be found in sources reviewed on 17 November 2026.

"APS is designed to complement lithography by adding a controlled pitch-splitting step"

Amin Karimi, CTO, AlixLabs, Sax Forma launch, 23 June 2026

The strongest result the company has published is its own. The launch page says APS was demonstrated on 300 mm wafers from UMC and on Intel FinFET test silicon, where it reduced the half-pitch from 25 nm to 12.5 nm, a geometry the company places in the 3-nm class. It names no customer, and neither UMC nor Intel has published a statement on the results in sources reviewed on 17 November 2026. The company announced on 5 February 2026 that Taiwan's patent office had issued a notice of allowance for a selective etching patent, with grant expected after formalities, and mentions corresponding filings in other jurisdictions without naming them.

Seven years from Lund Nano Lab to a beta tool

The technology began as a discovery at Lund Nano Lab about ten years ago, according to a NanoLund article of December 2025, in which Sundqvist says the lab has been "foundational" and that AlixLabs "would not exist without it". The company register entry summarised by Allabolag records the registration on 22 July 2019 and lists the company as active, with Sundqvist as external managing director.

The record

From a 2019 spin-off to a beta etch tool in assembly

The production target moved from 2025, set at the 2023 funding round, to early manufacturing in 2027 and a high-volume tool in 2028.

  1. Jul 2019RegisteredAlixLabs AB registered in Sweden, a spin-off from Lund University
  2. May 2023ALL2GaN startsPartner in a 43-member Chips Joint Undertaking project on gallium nitride chips€240,555
  3. Sep 2023Funding roundSEK 40 million raised; production adoption targeted for 2025SEK 40M
  4. Nov 2025Series A announced€14.1 million subscribed; Brooks platform installed for the 300 mm beta system
  5. Apr 2026Series A closesStephen Industries joins; round closes at €15 million; MoU with VDL ETG Projects€15M
  6. Jun 2026Sax Forma launchedFirst commercially offered APS tool, in beta
  7. Aug 2026Beta chamber assemblyFirst Sax Forma beta chamber enters final assembly at VDL Projects
  8. Oct 2026imec evaluationSix-month APS test begins in the NanoIC pilot line
  9. Nov 2026EIC selectionAPS one of 35 projects selected from 453 full applicationsSelected
  10. 2028Gamma toolPlanned high-volume manufacturing platform, per the companyPlanned

Allabolag register data; Techarenan, 7 September 2023; CORDIS, ALL2GaN; Semiconductor Today, 19 November 2025; AlixLabs releases 2025 and 2026; imec, 1 October 2026; EIC, 16 November 2026.

The dates the company set for itself have moved. When it raised SEK 40 million in September 2023, Sundqvist told Techarenan the goal was to have the process adopted by chipmakers "in their most advanced production by 2025". In November 2025, Semiconductor Today reported the new plan: beta testing with customers from 2026 and early manufacturing implementation targeted for 2027. The company's August 2026 update puts further customer deliveries in 2027 and a high-volume "Gamma" platform in 2028.

The hardware steps are on record. The company installed a Brooks Automation wafer-handling platform for its 300 mm beta system in November 2025, signed a memorandum of understanding with VDL ETG Projects in April 2026 to industrialise the tool, and said on 28 August 2026 that the first Sax Forma beta chamber had entered final assembly at VDL Projects in the Netherlands, for installation in its own cleanroom by the end of 2026.

What the money record shows

The private funding is well documented, though the Series A carries two figures. The company announced a €14.1 million Series A in November 2025, led by Navigare Ventures, Industrifonden and FORWARD.one with STOAF and Japan's Global Brain. Semiconductor Today reported the same round as €15 million. The company's release of 14 April 2026 explains the gap: €14.1 million was subscribed in 2025 and the remaining €0.9 million stayed open until the first quarter of 2026, when the Finnish investor Stephen Industries joined and the round closed at €15 million, also reported by Tech.eu.

Public grants before the EIC were small. Vinnova, the Swedish innovation agency, awarded about €345,000 over three years, Compound Semiconductor reported in November 2024. Novus Light reported in August 2024 a PhotonHub Europe project in which PhotonHub provided €58,500. And CORDIS lists AlixLabs among 43 partners of ALL2GaN, a Chips Joint Undertaking project on gallium nitride chips led by Infineon that ran from May 2023 to October 2026, with a net EU contribution to AlixLabs of €240,555. The project's partner page says AlixLabs was to develop atomic layer etching processes for silicon nitride and gallium nitride.

The money

Private equity dwarfs the public grants so far

The Series A is closed, per the company. The EIC grant and the EIC Fund equity are the company's figures for a selection that is not yet a funding commitment; the equity is a ceiling subject to the fund's approval. The ALL2GaN figure is the net EU contribution recorded by CORDIS.

AlixLabs, 14 April and 17 November 2026; CORDIS, ALL2GaN; Compound Semiconductor, 18 November 2024; Novus Light, 27 August 2024. Values in € millions.

The filed accounts show a company growing on that money. Turnover, as summarised by Allabolag from the annual reports, rose from SEK 666,000 in 2021 to SEK 18.5 million in 2025, with a dip in 2024. The annual loss grew every year, from SEK 1.7 million in 2021 to SEK 30.6 million in 2025. Equity jumped from SEK 9.1 million at the end of 2024 to SEK 133.5 million at the end of 2025, the year the Series A was subscribed.

The accounts

Turnover grew almost fivefold in 2025 while the loss kept rising

Turnover reached SEK 18.5 million in 2025; the annual loss grew every year to SEK 30.6 million. The summary does not split turnover by tool sales and services.

Allabolag, AlixLabs AB annual accounts 2021 to 2025. Values in SEK millions.

A European patterning step, tested in a European pilot line

The Commission's Chips Act page says the regulation entered into force on 21 September 2023, that the Chips Joint Undertaking supports five pilot lines, and that the Commission proposed a Chips Act 2.0 in June 2026 to reduce strategic dependencies and support advanced chip production in the EU. AlixLabs ties its EIC selection to that proposal in its announcement of 17 November 2026.

The most useful check on the company's claims is now running in one of those pilot lines. imec announced on 1 October 2026 a six-month evaluation of APS within NanoIC, the pilot line it coordinates with funding from the Chips Joint Undertaking. imec prepares line-and-space structures, AlixLabs splits them, and imec measures critical dimension and its uniformity, line-edge and line-width roughness, pitch walking, profile and stochastic defects, the measures a fab would ask about before adopting any patterning step. Giuseppe Fiorentino, programme manager at imec, says the aim includes "reducing development risk". The six months end in March 2027; no results had been published by 17 November 2026.

What the EIC project promises, and what can be checked

The company says it will use the EIC money to industrialise APS, advance process development and prepare Sax Forma for wider adoption by chipmakers. The EIC announcement gives no amount per company; the €2.5 million grant and the potential €10 million EIC Fund investment are the company's figures, the equity "subject to the fund's investment assessment and approval process", in the company's words.

  1. Signed EIC grantPendingSelected on 16 November 2026; no grant agreement or CORDIS project public on 17 November 2026.
  2. 300 mm beta toolIn assemblyFirst Sax Forma beta chamber in final assembly at VDL Projects, per the company, 28 August 2026; installation planned by end of 2026.
  3. Pitch halving on industrial siliconCompany claim25 nm to 12.5 nm half-pitch on Intel test silicon, per the company; no independent publication found.
  4. Independent pilot line dataUnder waySix-month NanoIC evaluation at imec started 1 October 2026.
  5. Customer deliveries in 2027Too earlyNo customer named on the company site or in its releases reviewed on 17 November 2026.

What the company says

A single etching step that doubles pattern density after any lithography, cuts patterning costs by up to 50%, works at 3-nm-class geometries and will reach high-volume manufacturing with a Gamma tool in 2028.

What the record shows

A company registered in 2019, a €15M Series A, a CORDIS-listed role in ALL2GaN, turnover of SEK 18.5M in 2025 against a SEK 30.6M loss, a beta tool in assembly and an imec test under way; the 2025 adoption target has passed and no fab customer is named in sources reviewed on 17 November 2026.

Verdict

AlixLabs is one of the few European companies trying to change how the smallest chip features are made rather than how they are designed, and its money, partners and hardware are better documented than most at this stage. What it has not yet shown in public is the thing a fab buys on: measured uniformity and defect data from someone other than itself. The imec evaluation due to end in March 2027 is the first chance to see it, and the company's own adoption date has already moved from 2025 to 2027.

The reporting is based on publicly available sources, listed below.

Industry

Electronics and semiconductorsSemiconductors

Focus
  • Semiconductor manufacturing equipment
Technologies
  • Plasma technology
  • Semiconductor nanofabrication
Keywords
  • Semiconductor manufacturing
  • Chip patterning
  • Atomic layer etching
  • EUV lithography
  • Foundries
  • Power semiconductors