Copprint: An EIC Accelerator Case for Copper Ink Over Silver
In 2017 Henkel explained why conductive inks were still made of silver: copper-based technologies could "significantly reduce costs", yet "all solutions are still silver-based due to technical challenges such as copper oxidation and expensive production processes." Copprint, a Jerusalem company founded in 2016, says it has solved that with a chemical sintering agent that lets nano copper ink turn conductive in open air, in seconds. On 16 November 2026 the European Innovation Council named it among 35 companies selected from its May and July 2026 cut-offs.
The project on the list of selected companies linked from the EIC announcement, also called Copprint, is described as a "non-oxidizing nano copper ink enabling additive manufacturing of PCBs", at lower cost and with "local EU manufacturing", and is recommended for blended finance. Selection is not a funding commitment: the EIC expects grant agreements within three months of the announcement, so no grant amount, project dates or CORDIS record exist yet. What can be checked today is the company's products, its patents, its corporate investors and an earlier EU project in which it already holds money.
Company file
- Legal entity
- Copprint Technologies Ltd, a private SME in Jerusalem, Israel, per CORDIS
- Founded
- 2016, per Henkel's 2017 release and Tatsuta's 2023 notice
- Founders
- Michael Grouchko, a chemist, and Ofer Shochet, a physicist and chief executive
- Products
- Eleven LF-series copper inks for RFID antennas, printed circuit boards and solar cells
- Investors
- Henkel (2017), Tatsuta (2020 and 2023), HP; amounts not published
- EU projects
- IBC4EU, Horizon Europe, November 2022 to April 2026, €1,045,975 to Copprint
- EIC project
- Copprint, May/July 2026 cut-off list, recommended for blended finance, selected on 16 November 2026
Copper that does not oxidise in the oven
Conductive inks are printed and then sintered, so the metal particles fuse into a continuous track. Silver tolerates this in air; copper turns to oxide. Copprint's technology page says its "patented chemical sintering agent" triggers a reaction in the copper nanoparticles that prevents oxidation, with "rapid few seconds self sintering at 180-300°C", depending on the substrate. A Voltera interview with Shochet, published on 19 June 2025, gives the range as 150 to 300°C. The company lists paper, PET, FR4, polyimide, glass and solar cells as substrates, and screen, inkjet, flexographic and gravure printing as methods.
The cost argument is the company's own. Its home page claims "5-10X price performance compared to silver inks" and "up to 90% material savings compared to etching", the subtractive process that removes copper foil from most circuit boards today. No independent cost comparison could be found in sources reviewed on 17 November 2026.
The patents are on record. Google Patents lists WO2018025271, "Formulations and processes for producing highly conductive copper patterns", with Grouchko as inventor, Copprint as assignee and an Israeli priority date of 4 August 2016. The family includes a granted European patent, EP3494184B1, and granted patents in Israel, China, Japan and South Korea; the United States application was abandoned in August 2024 after an office action went unanswered, per the same page. Grouchko is also named, with Shlomo Magdassi of the Hebrew University, on an earlier Yissum patent family on inks containing metal precursor nanoparticles; no source reviewed says whether Copprint licenses it.
Three markets, one ink
Henkel's 2017 release said the ink had "already achieved technical product qualifications for printed RFID antennas". Several of Copprint's news posts since 2024 cover solar contacts, and the EIC project is about circuit boards. The company's site lists all three as solutions. The EIC description puts the weight on the third, the one with the least public evidence.
The record
Ten years from a copper ink patent filing to an EIC selection
Copprint's investors are corporate before they are financial: Henkel in 2017, Tatsuta from 2020. Its first EU money came through a solar pilot line, not through the EIC.
- Aug 2016Core patent filedIsraeli priority application for copper ink formulations, Michael Grouchko as inventor; Copprint was founded the same year
- Dec 2017Henkel investsHenkel Adhesive Technologies announces an undisclosed investment; the ink is qualified for printed RFID antennas
- Dec 2020Tatsuta investsFirst investment by the Japanese wire and paste maker Tatsuta, per its 2023 notice
- Nov 2022IBC4EU startsHorizon Europe solar pilot line project with Copprint as one of 18 participants€1.05M
- Jan 2023Production deal in JapanTatsuta agrees to make Copprint's ink in Japan and buys convertible equity
- Dec 2024TOPCon resultCopprint reports a 24.04% TOPCon cell using 25% less silver, in a study with UNSW
- Jul 2025Suspension proposedThe Commission proposes suspending Israeli entities from EIC Accelerator funding; the Council must decide
- Apr 2026IBC4EU endsThe pilot line project closes after 42 months
- Nov 2026SelectedOne of 35 companies on the EIC list for the May and July 2026 cut-offs, recommended for blended financeSelected
Google Patents, WO2018025271; Henkel, 4 December 2017; Tatsuta, 31 January 2023; CORDIS, IBC4EU; Copprint news posts; European Commission, 29 July 2025; EIC, 16 November 2026.
Corporate backers, undisclosed amounts
Copprint's money has come mostly from industrial companies. Henkel Adhesive Technologies announced an investment on 4 December 2017, with Shochet saying it would let the company "scale up the production". VoxelMatters reported on 15 August 2018 that Copprint had "just added HP to Henkel as its newest large investor"; the company's About page names Henkel, HP and Tatsuta as strategic investors and lists an executive from each among its leadership.
The most detailed document comes from Japan. A Tatsuta Electric Wire and Cable notice of 31 January 2023 says Tatsuta first invested in December 2020, reached a basic agreement to manufacture Copprint's copper nano ink in Japan, planned to install equipment and start sample shipments during 2023, and invested again by taking convertible equity. The notice says Copprint began volume shipments in 2022 from its pilot production line in Israel and would use the money to expand capacity there and hire in sales and support. None of the investors published an amount. Copprint's post of 10 December 2024 mentions a $1 million investment from Capital Nature, and a post of 26 July 2025 announces its place in the first Amazon Devices Climate Tech Accelerator. The company publishes no total raised, revenue or staff figure.
EU money for the solar work came first
The EIC selection is not Copprint's first EU money. CORDIS lists Copprint Technologies Ltd as one of 18 participants in IBC4EU, a Horizon Europe project to pilot back-contact solar cells for a European gigawatt-scale production chain. The project ran from 1 November 2022 to 30 April 2026 with an EU contribution of €13,490,668.75; Copprint's net EU contribution is €1,045,975 on total costs of €1,494,250.
The EU money on record
Copprint has the third-largest share of a €13.5M solar pilot
Net EU contributions to the largest participants in IBC4EU, a Horizon Europe pilot line for back-contact solar cells that ran from November 2022 to April 2026. CORDIS lists Copprint, of Jerusalem, as an SME with total costs of €1.49M.
CORDIS, IBC4EU, grant agreement 101084259. Values in € millions.
The first periodic report, covering November 2022 to April 2024, says Copprint and the coordinator ISC Konstanz developed a method for low-temperature sintering of copper paste, and that a high-throughput sintering tool for copper pastes in an industrial environment "was identified and tested by Copprint". Outside that project, Forschungszentrum Jülich's announcement of silver-free heterojunction cells above 23% efficiency, funded through the Horizon project EMPOWER, thanks "the Copprint team" without describing its role. Copprint's own post of 10 December 2024 reports a 24.04% TOPCon cell made with its paste in a study with UNSW, using 25% less silver than standard industrial cells.
An Israeli company in a contested programme
The EIC announcement says 453 companies submitted full applications, 88 reached interview and 35 were selected, with €84 million in proposed grants across all of them and 32 to be assessed by the EIC Fund for equity of up to €10 million each. It publishes no amount per company.
The competition
35 companies selected from 453 full applications
The May and July 2026 cut-offs were evaluated together. The EIC put the proposed grants for all 35 companies at €84 million in total and published no per-company amount.
EIC, The European Innovation Council selects 35 deep tech companies for its Accelerator support, 16 November 2026.
Israel has been associated with Horizon Europe since 2021. On 29 July 2025 the Commission proposed a partial suspension that "specifically concerns the participation of entities established in Israel" in activities funded by the EIC Accelerator; it needs a qualified majority in the Council. Sources reviewed on 17 November 2026 show no adopted Council decision, and the November 2026 list includes Copprint. Whether the proposal affects the grant preparation is not public.
The European case is the one in the project description: circuit boards made additively in Europe at lower cost. IBC4EU's own title describes a "vertical integrated European GW scale PV production value chain". The production sites on record are elsewhere: a pilot line in Israel and a planned Tatsuta line in Japan. Sources reviewed on 17 November 2026 name no European production site or European circuit board customer.
What can already be checked
- Non-oxidising nano copper inkOn saleEleven LF-series inks listed on the company site; volume shipments since 2022, per Tatsuta.
- Additive manufacturing of PCBsCompany claimA 2024 case study of a circuit board on glass for media displays on the news page; no named PCB manufacturer.
- Lower cost than silver and etchingCompany claim5 to 10 times price performance and up to 90% material savings, per the company; no independent comparison found.
- Local EU manufacturingToo earlyNo European production site named in sources reviewed on 17 November 2026.
- Signed EIC grantPendingGrant agreements expected within three months of 16 November 2026, per the EIC.
What the company says
Air-sintered copper ink at 5 to 10 times the price performance of silver, circuit boards printed with up to 90% less material than etching, a compostable process and local manufacturing in the EU.
What the record shows
A product range on sale, a granted European patent, corporate investment from Henkel and Tatsuta, €1,045,975 of EU money in a closed solar pilot, and production in Israel with a partner line planned in Japan; no European site, PCB customer or financial figures.
Verdict
Copprint arrives at the EIC with more on the record than a start-up usually does: inks on sale, a core patent granted in Europe and two industrial groups as investors. The EIC project asks it to take the same chemistry into circuit boards, the market where it has published the least, and to manufacture in Europe. Neither the board customers nor the European plant are on the public record yet, and the grant itself is still to be signed while a proposal to exclude Israeli entities from the programme sits with the Council.
The reporting is based on publicly available sources, listed below.
Sources
- EIC, The European Innovation Council selects 35 deep tech companies for its Accelerator support, 16 November 2026
- CORDIS, IBC4EU project fact sheet, grant agreement 101084259
- CORDIS, IBC4EU periodic report for November 2022 to April 2024
- Copprint, company website
- Copprint, technology page
- Copprint, About page
- Copprint, news page
- Copprint, Revolutionising solar efficiency with Copprint, 10 December 2024
- Copprint, Copprint makes the Cleantech Global Top 100, 10 December 2024
- Copprint, Copprint selected for the Amazon Devices Climate Tech Accelerator, 26 July 2025
- Henkel, Henkel invests in advanced materials start-up Copprint, 4 December 2017
- VoxelMatters, Something big brewing in 3D printed metal electronics involves copper, 15 August 2018
- Tatsuta Electric Wire and Cable, notice on production cooperation and additional investment in Copprint, 31 January 2023 (Japanese)
- Voltera, interview with Ofer Shochet, 19 June 2025
- Google Patents, US20190177566A1 and family, Formulations and processes for producing highly conductive copper patterns
- European Patent Office, EP2820093, Inks containing metal precursors nanoparticles
- Forschungszentrum Jülich, High-efficiency silver-free silicon heterojunction solar cells
- European Commission, Commission proposes partial suspension of Israel's association to Horizon Europe, 29 July 2025
Industry
Materials and chemicalsElectronic materials
AlsoEnergySolar energy
- Focus
- Conductive pastes and inks
- Solar materials and manufacturing
- Technologies
- Printed electronics
- Nanoparticles
- Materials chemistry
- Keywords
- Conductive inks
- Printed circuit boards
- Silver replacement
- Solar cell metallisation
- RFID antennas
- Copper metallisation